成都科立达科技有限公司 ——了解洗车机无人值守洗车机加油站洗车机、成都洗车机、四川洗车机、洗车机电脑洗车设备全自动洗车设备、洗车机厂家、电脑洗车设备  服务热线:4009950778
您当前的位置:

洗车设备

新闻详情   News detail

洗车机-悬浮控制参数对磁浮车辆与道岔梁耦合振动的影响分析
来源: | 作者:cleanout | 发布时间: 2022-03-22 | 2584 次浏览 | 分享到:
洗车机-悬浮控制参数对磁浮车辆与道岔梁耦合振动的影响分析

洗车机悬浮控制参数对磁浮车辆与道岔梁耦合振动的影响分析

(1.中铁**勘察设计院集团有限公司,陕西 西安 710043;2.西南交通大学 牵引动力国家重点实验室,四川 成都 610031)
摘要:建立了包含PID悬浮控制系统的两节编组磁浮列车动力学模型和细致的道岔梁有限元模型,仿真分析了不同悬浮控制参数条件下磁浮列车以30 km/h通过道岔梁时的动力学响应。仿真结果表明,间隙反馈系数取值偏小时,电磁铁悬浮间隙的波动幅值较大,不利于行车安全;增大间隙反馈系数,电磁悬浮系统的特征频率逐渐接近道岔梁的一阶垂弯模态频率,导致车岔耦合振动更强烈。间隙速度反馈系数取值较小时,电磁悬浮系统的阻尼偏小,车体振动加速度较大;间隙速度反馈系数取值偏大时,微分环节超前调节作用过强,车岔耦合振动剧烈。为缓解磁浮车辆与道岔梁的耦合振动,建议间隙反馈系数在7000~8000之间选取,速度反馈系数在45~60之间选取。
关键词:洗车机;磁浮列车;道岔;反馈控制;耦合振动;数值仿真
中图分类号:U237;U441+.3    文献标志码:A            doi:10.3969/j.issn.1006-0316.2022.02.006
文章编号:1006-0316 (2022) 02-0038-09
Influence of Levitation Control Parameters on Coupled Vibration Between Maglev Vehicles and Switch Girder
YANG Zhinan1,FENG Yang2,LIU Dongsheng2,ZHAO Chunfa2
( 1.China Railway First Survey and Design Institute Group Co., Ltd., Xi’an 710043, China;2.State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031, China )
Abstract:In this paper, a dynamic model of two-car maglev trainset is built considering the PID levitation control system, meanwhile, a detailed finite element model of the switch girder is also established. Then, they are used to calculate dynamic response of maglev train with different levitation control parameters whenit passes through the switch girder at a speed of 30km/h. The simulated results show that the levitation airgap fluctuation become larger when the airgap feedback coefficient is small, which is unfavorable for train ride safety. With the increase of airgap feedback coefficient, the characteristic frequency of electromagnetic levitation system gradually approaches the first-order vertical bending modal frequency of the switch girder, which leads to stronger coupled vibration. When the airgap velocity feedback coefficient is small, the damping of electromagnetic levitation system is small, so the vibration acceleration of carbody become larger. If the airgap velocity feedback coefficient is quite large, the coupled vibration is violent due totoo strong lead compensation effect. In order to alleviate the coupled vibration between maglev vehicles and the switch girder, it is suggested to select the airgap feedback coefficient between 7000 and 8000 and the airgap velocity feedback coefficient between 45 and 60.
Key words:maglev train;switch;feedback control;coupled vibration;numerical simulation
———————————————
收稿日期:2021-07-09
基金项目:中铁**勘察设计院集团有限公司课题:磁浮道岔优化创新及选型研究(院科18-05);国家重点研发计划课题子任务:高速磁浮车辆动力学性能匹配设计理论与技术(2016YFB1200602-15)

新闻中心
联系我们

      电话

          

   

4009 950 778

028-85694108

          

   


     地址:四川成都双流西航港双华路188号


      网站:www.cleanout.cn


      邮箱: 2790385074@qq.com


      客服: 2790385074

全国免费服务热线:
4009950778